Available: Yes
Features & Benefits:
COLOR:
White
APPLICATION CONSISTENCY:
Brush, glove, or spray
AVERAGE WEIGHT/U.S. GALLON (ASTM D 1475):
9.8 pounds (1.17 Kg/l)
AVERAGE NON-VOLATILE (ASTM D 1644):
44% by volume (62% by weight)
COVERAGE (FSTM 72):
(Subject to the nature of material being coated). Wet coverages
shown below are for smooth non-porous surfaces. Porous or
rough surfaces will require higher gallonage to attain required dry
thickness.
4 gallons per 100 square feet minimum (1.6 l/m2) 0.064 in. wet
thickness (1.6 mm)
DRYING TIME 73°F (23°C) 50% RH (ASTM D 1640):
Set to Touch: 8 hours
Dry Through: 24 hours
SERVICE TEMPERATURE LIMITS (FSTM 70):
(Temperature at coated surface) 0°F to 180°F
(-18°C to 82°C)
WATER VAPOR PERMEANCE (ASTM F 1249):
0.05 perm at 0.035 inch dry film thickness
(0.03 metric perm at 0.9 mm).
WET FLAMMABILITY (ASTM D 93):
Flash point 100°F (38°C)
(ASTM E 84):
Flame Spread: 20
Smoke Developed: 10
Tested at coverage rate of 50 square feet per gallon (1.2 m2/l).
Applied to 1/4 inch (6.4 mm) inorganic reinforced cement board.
Complies with:
Tite-Fit Coating meets the requirements of Military Specification
MIL-C-19565C, Type II.
Tite-Fit Coating meets NFPA 90A and 90B 25/50 requirements.
Tite-Fit Coating contains no asbestos, lead, mercury, or mercury compounds.