Mariam

Available: Yes

Add To Offer

Features & Benefits:

COLOR:

Gray

APPLICATION CONSISTENCY:

Air atomized spray, brush, roller, or duct liner machine

AVERAGE WEIGHT/U.S. GALLON (ASTM D 1875):

8.8 lbs. (1.05 kg/l)

AVERAGE NON-VOLATILE (ASTM D 1644):

51% by volume (52% by weight)

COVERAGE (FSTM 72):

(Subject to type of surface and material being bonded)

Spray: Approx. 300-500 sq. ft./gal. (7.4 - 12.3 m2/l)

Brush/Roller: 150-300 sq. ft./gal. (3.7 - 7.4 m2/l)

BONDING TIME RANGE (FSTM 66):

0 to 10 minutes (depending on temperature and humidity)

SERVICE TEMPERATURE LIMITS (FSTM 70):

(Temperature at coated surface)

Minus 20ºF to 200ºF (-29ºC to 93ºC)

WET FLAMMABILITY (ASTM D 3728):

Flash Point: No flash to boiling, over 200ºF (93ºC)

SURFACE BURNING CHARACTERISTICS (ASTM E 84):

Flame Spread: 0

Smoke Developed: 0

Tested at coverage rate of 300 sq. ft. per gal. (7.4 m2/l)

Applied to 1/4 inch (6.4 mm) inorganic reinforced cement

board. The flame spread may vary at different product thickness.

VOC: 2 g/l, less water and exempt solvents.

Stic-Fas Adhesive contains no asbestos, lead, mercury, or mercury compounds.

COMPLIES WITH:

Stic-Fas Adhesive is water based and non-flammable in the wet state. It meets the requirements of ASTM C916-85, Type II (ASC-A-7001, Type II)
Stic-Fas Adhesive meets NFPA-90A & 90B 25/50 requirements.
Stic-Fas Adhesive meets requirements for LEED IEQ 4.1 Low-Emitting Materials, Adhesives and Sealants.